Galería



Swap Tranny AT > MT . (Solamente para 3SGE)

Ver el tema anterior Ver el tema siguiente Ir abajo

Swap Tranny AT > MT . (Solamente para 3SGE)

Mensaje por Maestro2jz el Lun Sep 19, 2011 1:15 pm


Esa informacion no esta completo como hacerlo swap tranny AT > MT sino solo que ellos da una ilustracion para que sepa lo que necesita para hacerlo.


Gear box
drive shaft (or prop shaft...caled alot of shit in different parts of the world)
flywheel
clutch
clutch pedal assembley & master cylinder
brake pedal assebmley possibly the master cylinder as well

*******************************

1) You'll need a front MT propeller shaft, the one that attaches directly to the gearbox and MT tranny mounts.

2) There is already an indentation in the firewall where the clutch master cylinder would fit, so you only need to drill the appropriate holes.

3) The opening in the transmission tunnel, where the shift lever would stick out, needs to be enlarged at the forward end. Not too much I think.

4) If you are not removing the gearbox wiring harness (I recommend you don't), grease up the plugs & connectors to prevent corrosion.

5) The only really tricky part is that you need to find & short 2 pins together in the harness to get the speedo to work, so a wiring manual is essential.

6) Of course, the whole set of pedals, MT gear boot and clutch master cylinder.

7) To mask off the AT LCD display, I used a set of masks from a 2000 MT gauge pod.

Cool Remember to plug the AT cooling pipes in the radiator.


Mas info:
http://z4.invisionfree.com/lexusaltezzaclub/index.php?showtopic=992&st=0&#last

_________________
SUPRA MK4 6spd - 2JZ Single Turbo HKS T51R // 1JZ PowerFC

**********

SOLD
Toyota Altezza 2JZ TwinTurbo 6spd // 2JZ PowerFC // Best Time 1/4 = 12.734 @ 112.01 // Best 60Ft = 1.688 // Dyno = 415 HP / 433 TQ

***************************************************
avatar
Maestro2jz
Admin

Mensajes : 2235
Fecha de inscripción : 21/07/2010
Edad : 33
Localización : tsukuba Circuit

http://sxe-10crewrd.pro-forums.in

Volver arriba Ir abajo

Ver el tema anterior Ver el tema siguiente Volver arriba

- Temas similares

 
Permisos de este foro:
No puedes responder a temas en este foro.